Homepage › Forums › Technical Discussion › Ram pump help
- This topic has 1 reply, 2 voices, and was last updated 11 years, 9 months ago by
Proudinfidel.
Viewing 2 posts - 1 through 2 (of 2 total)
-
AuthorPosts
-
June 6, 2011 at 12:00 am #62876
Proudinfidel
MemberI am in the process of building a ram pump the help reduce the demand on my well system and was thinking that if I took the spring out of a brass foot valve and put it on the pickup end of the drive pipe that it would work as a check valve without restricting the flow. Any comments or advice on this would be helpful thanks
June 25, 2011 at 12:00 am #65257caverdude
ParticipantA 1970’s book called “Producing your own Power” Has diagrams for building ram pumps. I’d like to learn a bit more about check valves myself. I have some diagrams for some simple ones in my article Home Water Production
-
AuthorPosts
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.