Materials generally available for building purposes can be classified into two generic groups – bulk materials and reflective foil laminates (RFL). The first of these relies on the resistance of air trapped in pockets between the fibres of the blanket type materials (mineral fibre materials) or the cells formed in the foamed structure of board or slab type materials (usually made from plastics such as polystyrene and polyurethane foams). The second reflects radiant energy away from the object or surface being protected. Thermal insulation in the outer fabric of a building is a vital component of an energy-efficient design strategy. The key to successful energy-efficient design is the control of heat flow through the external fabric. All the solar energy gained could be easily lost from an inadequately insulated building before it is able to be of benefit. It will have been noted that some materials have a very much higher thermal resistance per unit thickness than others irrespective of their density. The fact that air is a good insulator especially if it is bounded by a bright foil surface to limit radiation transfer can be very useful as well.
Cooling
In many parts of the world a passive solar building needs cooling as much as heating. One of the best, time proven methods of cooling is thermal coupling with the earth�s constant temperature. Dropping the ground floor at least one meter into the earth provides a more even exterior temperature which aids cooling as well as heating. Adequate structural engineering, drainage, and damp proofing are essential in below ground areas. Thermal isolation is the best and most economical way to temper the building�s environment. Using the earth�s thermal mass keeps the house at a reasonable temperature, and so does good insulation. Shades located outside and inside the windows, ventilation and reflective films on the windows are also very important in order to control temperature inside the building.
External Shades and Shutters
Exterior window shading treatments are effective cooling measures because they block both direct and indirect sunlight outside of the home. Solar shade screens are an excellent exterior shading product with a thick weave that blocks up to 70 percent of all incoming sunlight. The screens absorb sunlight so they should be used on the exterior of the windows. From outside, they look slightly darker than regular screening, but from the inside many people do not detect a difference. Most products also serve as insect screening. They should be removed in winter to allow full sunlight through the windows. A more expensive alternative to the fibreglass product is a thin, metal screen that blocks sunlight, but still allows a view from inside to outside. Hinged decorative exterior shutters which close over the windows are also excellent shading options. However, they obscure the view, block daylight completely, may be expensive and may be difficult for many households to operate on a daily basis.
Interior Shades and Shutters
Shutters and shades located inside the house include curtains, roll-down shades, and Venetian blinds. Interior shutters and shades are generally the least effective shading measures because they try to block sunlight that has already entered the room. However, if passive solar windows do not have exterior shading, interior measures are needed. The most effective interior treatments are solid shades with a reflective surface facing outside. In fact, simple white roller blinds keep the house cooler than more expensive louvered blinds, which do not provide a solid surface and allow trapped heat to migrate between the blinds into the house.
Reflective Films and Tints
Reflective film, which adheres to glass and is found often in commercial buildings, can block up to 85% of incoming sunlight. The film blocks sunlight all year, so it is inappropriate on south windows in passive solar homes. However, it may be practical for unshaded east and west windows. These films are not recommended for windows that experience partial shading because they absorb sunlight and heat the glass unevenly. The uneven heating of windows may break the glass or ruin the seal between double-glazed units.
Ventilation
Ventilation is the changing of air in buildings to control oxygen, heat and contaminants. Ventilation may occur in few forms. Building orientation, form, plan and user actions also alter air flow paths. Natural ventilation consumes no energy and has few if any running costs, but depends on weather conditions and can be difficult to control. Mechanical and air-conditioned ventilation are energy-driven alternatives to natural ventilation, normally dictated by building type, site and function. They can be particularly efficient as supplements to natural ventilation. Mechanical ventilation uses fans and ducts to supply and extract air in localised areas such as a kitchen. Air conditioning both treats and supplies air. It is particularly useful to cool air below ambient temperatures.
