The Water Motor
We all know how an industrial electric motor operates. You have a power switch. It turns electric current on and off to an electric motor, which then does work. That work can be pushing a cart, a fridge, a submersible water pump, or any number of rotary devices. What do you do off the grid, in the mountains of South America, where there is no power supply? What do you use to give power supply for your electric motor? Enter Ron & Diane in Bolivia, and their “Water Motor“. A unique Micro-Hydro device that uses the power of a falling stream to power stationary devices like saws, mills and generators like home generators and so on.
“Most of the common machines used in workshops, industry, and farms are driven by motors of only 0.5 – 5 horsepower. The Watermotor will produce this amount of power at an extremely low cost and with a minimum of ecological disruption.”
That’s right – cheap electricity, lower cost than solar panels for example.
STORY CONTINUES AFTER AD
Micro-Hydro Design Manual: A Guide to Small-Scale Water Power Schemes – buy it from Amazon US
Micro-hydro Design Manual: Guide to Small-scale Water Schemes – buy it from Amazon UK
A few of the nice features of this unit is that it doesn’t require a great volume of water, so the traditional dam does not need to be constructed, reducing cost, complexity, and ecological impact. It’s also designed to be locally serviced, and locally produced, enabling 3rd world villages to not only have low cost power, but a local industry. These units are typically built/owned at the village level as a benefit to all.
The model 90 has a 90mm (3.5″) Turgo turbine wheel and can use 4 water jets of up to 12.7 mm (1/2″) in diameter. Because it is smaller in diameter this wheel will turn at higher revolutions than the model 150 at the same water pressure.
The model 150 has a 150 mm (6″) Turgo wheel and uses 4 jets of up to 7/8″ (22.2 mm) diameter. This is three times the volume of water as a 1/2″ jet, therefore producing three times as much power with the same incoming pressure.
5 Responses
I would like some help on my science fair project my question is how do you make something that runs on gas run on water? Which is a hydro powered engine
I would to know more about water powering a motor to supply power to my house.
Thanks
I am interested in more info. How many models are available? What volume of water is needed to operate each? (in litres/minute) What is the cost of each? How much is shipping to australia? North America? Europe? How many can the factory produce?
I have all the knowlege to have well to make water motors of all sizes, to make any amout of power, run cars trucks, any thing. Just not jet motors as I not know how they work, but I reckon well know you could make, well run that much power off one of my motors. They put out clean air and do not use much water either, any way time to find some motr builders who want to make some money. Clean out sea water runsthem fine too. wait to you have one of these babys. I made heaps of petrol motors but they got nothing,.
Hi there. Wondering if you have parts list on how your friend made this water motor. I think it a realy good idea and would like to make one my self.